TIGER 352/MA, manual vertical sawing machine to cut from -45° to +60, with HSS blade.

A FEW FEATURES:
– Sawing head movement on double linear guides with preloaded slides with recirculating ballscrews.
– Electrical panel (wiring totally identi able, main lockable disconnect switch, motor magneto- thermal overload, minimum tension coil, protection against missing phase, low tension safety device 24 V).

HEAVY-DUTY

> The cast-iron structure absorbs vibrations and ensures greater cutting stability and longer blade life.

> The two-stage gear transmission guarantees a high cutting efficiency and torque.

> The adjustable steel anti-burr device clamps the material both in the infeed and outfeed.

> The control panel equipped with thermal relay and minimum-tension coil ensures maximum protection against phase failure.

EXCEPTIONAL FLEXIBILITY

>The mechanical stops at -45°, 0°, +45° and +60° with a locking device at all angles in between allow the quick positioning of the saw head. 

> The clamping unit sliding longitudinally to the right and left of the saw head allows to clamp the piece as close as possible to the cutting line.

> The adjustable steel anti-burr device clamps the material both in the infeed and outfeed, thus granting a burr-free cut.

> The adjustable pneumatic vice pressure (OPTIONAL) allows to adjust the clamping pressure according to the hardness of the material to cut. 

> Engraved metric scale and flip-over stop are the perfect solution for precision and serial cuts at any length.

	Ø				Ø
0°	350	115 mm	95 mm	180 x 95 mm	350	90 mm
+ 45°	350	110 mm	95 mm	125 x 95 mm	350	64 mm
+ 60°	350	90 mm	90 mm	90 x 90 mm	350	45 mm
– 45°	350	110 mm	95 mm	125 x 95 mm	350	64 mm

 

Max. vice opening

190 mm

 

Disc size	HSS 350 x 32 x 2.5 mm
Blade motor power	1.8/2.5 kw – Three-phase
Blade rotation speed	15/30/45/90 rpm – 4 Speeds