fbpx

SW DOUBLE-END TUBE BENDER

SW DOUBLE-END TUBE BENDER It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem. As it is controlled by microcomputer, it is easy to operate and maintain it.

Category:

SW DOUBLE-END TUBE BENDER

FEATURES

1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.

2. As it is controlled by microcomputer, it is easy to operate and maintain it.

3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.

4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.

5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.

6. One or two tubes can be bent in one time according to its size, material and outer diameter.

STANDARD ACCESSORIES
One pair of mould, one set of retaining device

SWBD38TET

SWBD38TET

SWBD38ATET

The head can turn for 90 inside and outside

SWBD38CNCTET

Full-automatic double-end tube bender
error: Content is protected !!