fbpx

FRICTION SAWS

Friction Saw, operation is based on strength of the frictional heat, which is generated between the saw teeth and work piece
when the saw runs at high speed. Dee Tee’s Friction Saws are made from imported Chrome-Vanadium Steel (Cr-V) steel, 1.2235 material. 

Friction Saws,  Tooth profiles are obtained from Vollmer Machine of Germany.

Friction Saws of OD 450, 510, 600, 710 and bore 35 mm are available off the shelf.

Friction saw operation is based on strength of the frictional heat, which is generated between saw teeth and work piece when the saw runs at high speed.

Cr-V steels retains its toughness and has ability to resist the stress of high operating speeds (60 – 90 meter per second).

Saw should be mounted true and should not run out.

Friction SawsFOLLOWING FRICTION SAW ARE ALSO AVAILABLE OFF SHELF

  • OD 450 BORE 35 mm
  • OD 510 BORE 35 mm
  • OD 600 BORE 35 mm
  • OD 710 BORE 35 mm

Dee Tee Friction Saws retain their toughness and have ability to resist the stresses of high operating speeds.

The most suitable hardness is 40-44 hrc. Its teeth sharpness retention quality is ensured by closely controlled heat treatment and accuracy of teeth profile.

Range- 350 mm dia to 1000 mm dia

Additional information

Tool Type

error: Content is protected !!