fbpx

SHARK 282 NC 5.0 AUTOMATIC BAND SAWING MACHINE

Semi-automatic cutting machine Use a band saw blade Slitting machine Iron and stainless steel Medium size from Italy.

Able to cut round and square shafts with a maximum diameter of 250 mm.
Cuts square axles up to size 280×220 mm.
Suitable for straight 90 ° cutting and cutting degree from -45o to + 60o.
Economical band saw blade size is 27×0.9×2950 length.

SHARK 282 NC 5.0 , electro-hydraulic automatic band sawing machine which can operate also in semi-automatic, semi-automatic/dynamic and manual mode.

– Automatic cycle cut from 0° to 60° left

– Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left).

– CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

A FEW FEATURES:

– Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.

– 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time.

– Visualization and registration of alarms and events with the possibility to visualize the story of occurred events.

– Electronic inverter for the continuous adjustment of the band speed from 15 to 100 m/min.

– Latest generation hydraulic control unit, with high efficiency and low energy consumption.

– Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

– Cutting head and feeding vice positioning with joystick

– Automatic acquisition of the actual starting point of the cut.

– Electronic transducer to visualize band tensioning.

– Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.

– Coolant tank inside the steel base with two electric pumps so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals).

– Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditio- nal lubrication with emulsible oil.

– Wire chip brush for band cleaning.

– Machine arranged for handling with movement equipment.

– Bi-metal band for solids and sections.

– Service keys and instructions manual for maintenance and spare parts list.
FEATURED SPECIFICATIONS: SHARK 282 NC 5.0

shark282nc

error: Content is protected !!