fbpx

OTOSAD-98 Circular Saws Steel Relieving Machine

Hydraulic Automatic TCT Circular Saws Steel Relieving Machine Full Enclosure OTOSAD-98 automatic hydraulic steel reliever provides automatic relieving of straight, beveled or anti-kickback shoulders in one cycle. OTOSAD-98 is designed specially for relief grinding of T.C.T. circular saw blade bodies. After grinding a circular saw for many times, the carbide-tip gets abraded and the distance between the carbide-tip and the saw blade body diminishes. On the minimum level, the saw can not perform the cutting process properly. To use such saw blades again, relief grinding with OTOSAD-98 should be processed. After and creating an adequate operating distance by relief grinding, the old saw blade is ready to be used again.

Hydraulic Automatic TCT Circular Saws Steel Relieving Machine Full Enclosure OTOSAD-98 automatic hydraulic steel reliever provides automatic relieving of straight, beveled or anti-kickback shoulders in one cycle. OTOSAD-98 is designed specially for relief grinding of T.C.T. circular saw blade bodies.

Automatic TCT Saws Steel Relieving Machine

General Features

ㆍAutomatic relieving of straight, beveled or anti-kickback shoulders in one cycle.
ㆍIndependetly adjustable grinding and indexing speed
ㆍTotally enclosed cabin for operator safety.
ㆍSimple controls for ease of use.
ㆍInternal diagnostic.
ㆍRigid base.
ㆍErgonomic cabin for ease of loading and unloading.
ㆍProduction conformed with CE standards.

Become independent ! Optimum use of the unique grinding machine and the most operator-friendly control system.
Special high speed set-ups can give “off-carbide” grinding time which increases productivity without depending on
grinding accuracy or wheel life. ABM Control system eases the grinding operations while increasing your quality.

Automatic TCT Saws Steel Relieving Machine

Technical Specifications | Automatic TCT Saws Steel Relieving Machine

Circular saw outside diameter

100-750mm

Bore diameter         

 Min 16mm

Blade thickness 

Maks. 5mm

Tooth pitch

Maks.100mm

Feeding rate

0-25dis/dk.

Wheel diameter   

150mm

Wheel bore diameter 

20mm

Wheel thickness

Min. 3mm

Grinding motor

1HP

Coolant container capacity

~70lt.

Motor quantity

3

Connected load

2,7kW

Voltage 

380V, 3Ph, 60Hz

Net/gross weight

850/875kg

Dimensions

125*185*210cm

Hydraulic Automatic TCT Circular Saws Steel Relieving Machine Full Enclosure

Additional information

Cutting Machine

error: Content is protected !!