TIGER 372 CNC LR 4.0, automatic electromechanical vertical sawing machine with HSS blade which can operate also in semi-automatic mode, to cut steels from -45° to +60°. – CNC machine with a new controller: MEP 40. It has been specifically designed by MEP for the automation of its range of products, to obtain, on the same bar or on the material located on the loading magazine CB6001 (OPTIONAL), up to 300 cutting programs each of different lengths and quantities. – CB 6001 for high production for round square and rectangular bars up to the maximum cutting dimensions indicated on the brochure. The CB6001 must be ordered together with the machine.
> The two working modes (semi-automatic and automatic ones) allow to perform any kind of cut in the most efficient way.
> The control allowing to store up to 300 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs.
> The clamping unit, which is equipped with both a horizontal pneumatic cutting-off vice sliding on the left and right side of the blade and a vertical vice, ensures an efficient and safe clamping of the material even in case of tube cutting.
> The three-stage gear transmission allows to perform high-speed cuts, thus ensuring longer blade life.
> The bar feeder with single stroke 1000 mm is repeatable to cut to any length.
> The vector inverter for infinite variable blade speed from 15 to 150 rpm allows to adjust the saw blade rotation speed according to the type of material.
> The material library allows the automatic setting of the blade speed (S) and head down feed rate (F) according to the type of material. Moreover, from the extendable material library, you can choose the type and the geometry of the material, the hardness and the type of blade. Accordingly, the control sets the right blade speed and head down feed rate.
> The adjustable steel anti-burr device clamps the material both in the infeed and outfeed, thus granting a burr-free cut.
The saw head mitering system is manual by means of fixed mechanical stops at -45°, 0°, +45° and +60° and a locking device at all angles in between.
Technical data : TIGER 372 CNC LR 4.0
|0°||370||120 mm||110 mm||180 x 100 mm||120 mm||110 mm||180 x 100 mm|
|+ 45°||370||115 mm||100 mm||120 x 100 mm||70 mm||70 mm||70 x 70 mm|
|+ 60°||370||110 mm||90 mm||90 x 90 mm||50 mm||50 mm||50 x 50 mm|
|– 45°||370||115 mm||100 mm||120 x 100 mm||70 mm||70 mm||70 x 70 mm|
|Max. vice opening||190 mm|
|Minimun cutting length||10 mm|
|Rest piece no longer feeded||170 mm|
|Disc size||HSS 370 x 32 x 3 mm|
|Blade motor power||5.0 Kw – Three-phase|
|Blade rotation speed||15 ÷ 150 rpm|