fbpx

TIGER 402 CNC HR 4.0 RC AUTOMATIC SAWING MACHINE

TIGER 402 CNC HR 4.0 RC AUTOMATIC SAWING MACHINE

The automatic vertical sawing machine with controlled head rotation for best performance in aluminium and light metals angle cutting.

TIGER 402 CNC HR 4.0 RC, electropneumatic automatic circular sawing machine to cut aluminium and light alloys mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.

  • MITER CUTTING
  • LIGHT ALLOYS
  • TUBES, PROFILES AND EXTRUDED PROFILES
  • 0-130 MM

TIGER 402 CNC HR 4.0 RC, non-ferrous circular saw with TCT blade for aluminium and alloys, with programmable head mitering trough MEP CNC 40 controller. – Automatic vertical circular saw powered by brushless motor mitering from -45° to +45° (see picture A) and up to +60° in semiautomatic mode. This machine can be equipped with the bar loader CB6001 (OPTIONAL) for rounds, square and rectangle materials according to technical specifications. It can also be retrofitted. – TIGER 402 CNC HR 4.0 is completely covered to give safety to the operator (during working cycles, access to cutting area is hindered by a timed opening system) and for sound insulation.

A FEW FEATURES:

– 8” touch screen controller with self learning programming.

– Saw head mitering with high precision positioning (max 1’ of degree) powered by a brushless motor and pneumatic locking of saw head once positioned.

– Self-checking of all cutting parameters in real time.

– The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel. –

Sawing head movement on double linear guide with preloaded slides with recirculating ballscrews. – The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.

– Head down stroke by means of electromechanical cylinder to obtain the maximum cutting rigidity. – Shearing stress control.

– Transmission system with serrated pulleys and belts. – Blade rotation with 2-speed motor at 1400/2800 rpm.

– Automatic device to lubricate the blade only when the machine is cutting. – Rotation pin with thrust bearing to grant rotation precision and stability.

– Bar feeder has a length of 1000 mm and consists in a system given by screw/nut with recirculating ballscrews with stepper motor and vice with sideways movement so as to feed in also deformed bars.

– Machine base with chip tray and equipped to connect chip collector (optional).

– Pneumatic double locking vice.

– Pneumatic vertical vice. – Indicator with flashing light in case cycle is stopped.

– Machine arranged for handling with movement equipment.

– Circular blade Ø 400 mm.

– Service keys and instructions manual for maintenance and spare parts list.

Technical data : TIGER 402 CNC HR 4.0 RC

Ø
400 130 mm 120 mm 180 x 100 mm
+ 45° 400 115 mm 100 mm 120 x 100 mm
+ 60° 400 115 mm 90 mm 90 x 90 mm
– 45° 400 115 mm 100 mm 120 x 100 mm

 

Max. vice opening 185 mm
Rest piece no longer feeded 260 mm

 

Disc size HM 400 x 32 mm
Blade motor power 3.3 / 4.4 kw – Three-phase
Blade rotation speed 1400/2800 rpm

Additional information

Cutting Machine

error: Content is protected !!