SHARK 512 SXI EVO The main control with acustic commands is assembled on an articulated arm thus granting full control in all operational status.

> The LCD display shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time.

> Programming from the control panel also allows to adjust the saw head stroke limits according to the dimensions of the bars to cut. 

> The mechanical stops at +60°, +45°, 0°, -45° and -60° are equipped with a locking device at all angles in between ensure the quick positioning of the saw head.

> The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear. 

> Bar support with a roller on the infeed side: roller sliding on a ball screw linear guide to be easily moved when mitering at any angle. 

USER-FRIENDLY

> The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.

> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.

> The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal.

> The quick releasing clamping system allows to manually open/close the vice in an easy way. 

> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts. 

> A user-friendly interface with display and mechanical buttons ensures a reliable, easy and intuitive programming. SHARK 512 SXI EVO