SHARK 230-1 NC HS 5.0 Automatic Band Sawing Machine

SHARK 230-1 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cycle, it can also operate in semi-automatic mode.

SHARK 230-1 NC HS 5.0 The two working modes (semi-automatic and automatic ones) allow to perform any kind of cut in the most efficient way. 

230 mm 230 mm


Max. vice opening 235 mm
Minimun cutting length 10 mm
Rest piece no longer feeded 85 mm


Band size 2950 x 27 x 0.9 mm
Blade motor power 2.2 kw – Three-phase
Blade rotation speed 15 ÷ 100 m/min
Inverter power 3.0 Kw

> The control allowing to store up to 100 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs. 

> The saw head motion is powered by a pneumatic cylinder on linear guides with preloaded ball screw slides and ensures a mechanical vibration reduction and stability during the cut. 

> The automatic alignment of the front blade guide head according to the dimensions of the bars to cut reduces execution time. 



> The bar feeder with single stroke 600 mm is repeatable to cut at any length.

> The pair of vertical rollers allows to contain and align any kind of bar or bundle while feeding. 

> The OPTIONAL automatic retract of the bar feeder fixed jaw allows to feed also non-straight bars. The vector inverter for infinite variable blade speed from 15 to 100 m/min allows to adjust the band saw blade rotation according to the type of material.

SHARK 230-1 NC HS 5.0